0a937538

4.3.5. Cleaning of system of ventilation of a case

Over time in system of ventilation of a case of the engine the resinous deposits from crankcase gases complicating removal of these gases in engine cylinders for burning collect. Because of it pressure of gases in the engine increases and oil leaks through consolidations appear. In order that it was not, periodically clear and wash out system.
It will be required to you: a key "on 10", the screw-driver with a crosswise edge.

Good advice
Clear system of ventilation of a case before each replacement of oil.

1. Uncover the air filter...
2.... also take the filtering element (see. "Replacement of the filtering element of the air filter").
3. Shift a cover of the filter of system of ventilation of a case.
4. Take the filter of system of ventilation of a case from the case of the air filter. Replace strongly polluted filter new.
5. Weaken a collar inhaling...
6.... also disconnect the taking-away hose of system of ventilation from the union of the air filter.
7. Weaken a collar inhaling...
8.... also remove the taking-away hose of system of ventilation of a case from the union of a cover of a head of the block of cylinders.
9. Remove the airbringing sleeve (see. "Removal and installation of the air filter").
10. Weaken an inhaling of collars of fastening of hoses to a separator of system of ventilation of a case.
11. Disconnect the hose which is taking away crankcase gases in the case of the air filter from a separator...
12.... the hose which is taking away crankcase gases in an inlet sleeve...
13.... the hose bringing crankcase gases to a separator...
14.... and the hose which is taking away crankcase gases in the inlet pipeline.
15. Squeeze the unbent short moustaches of a collar of fastening of the bringing hose of system of ventilation of a case, shift a collar on a hose...
16.... also remove a hose from a branch pipe of a cover of a head of the block of cylinders.
17. Similarly disconnect the bringing hose from a branch pipe of the block of cylinders.
18. Disconnect the taking-away hoses from branch pipes of the case of the air filter and inlet pipeline.
19. Wash out hoses and a separator of system of ventilation of a case gasoline or kerosene, blow compressed air and dry. Clean openings of unions and branch pipes for connection of branch pipes.
20. Uncover a head of the block of cylinders (see. "Replacement of laying of a cover of a head of the block of cylinders of the engine").

Good advice
At each removal of a cover of a head of the block of cylinders replace its laying new.

21. Wash out gasoline or kerosene an internal surface of a cover of a head of the block of cylinders and its branch pipes.
22. Establish a cover of a head of the block of cylinders and hoses of system of ventilation of a case as it should be, the return to removal.