Replacement of a belt of the drive of the generator and compressor of the conditioner with manufacturer is not regulated. Replace a belt if at survey strong wear of working surfaces, anguishes or emergence of threads of a cord is found.

It will be required to you: a face head "on 17" with a neck, a core with a diameter of 2-3 mm.

1. Remove protection of a case of the engine (see. "Removal and installation of protection of a case of the engine").

2. Remove the right forward wheel (see. "Replacement of a wheel").

3. Remove the right forward flap (see. "Removal and installation of mudguards of wheels and flaps").

4. Take off a belt of the drive of the pump of the hydraulic booster of steering (see. "Replacement of a belt of the drive of the pump of the hydraulic booster of steering").

5. Put on a face head "on 17" with a neck a ledge of the case of the tension mechanism.	6. Weaken a belt tension for what turn the tension mechanism clockwise.

7. Take off a belt of the drive of the generator and compressor of the conditioner from a generator pulley.	8. Install the tension mechanism in a starting position under the influence of a spring and take off a belt of the drive of the generator and compressor of the conditioner from the car.

9. Turn the tension mechanism clockwise before combination of openings in the case of the mechanism and the lever of a tension roller and fix the mechanism in such situation a core of suitable diameter.

10. Establish a new belt and take out the fixing core.

11. Establish a belt of the drive of the pump of the hydraulic booster of steering and adjust its tension (see. "Check and adjustment of a tension of a belt of the drive of the pump of the hydraulic booster of steering").