Replacement of a belt of the drive of the pump of the hydraulic booster of steering by manufacturer is not regulated. Replace a belt if at survey strong wear of working surfaces, anguishes or emergence of threads of a cord is found.

It will be required to you: keys "on 10", "on 13", a six-sided key "on 8".

1. Remove protection of a case of the engine (see. "Removal and installation of protection of a case of the engine").

2. Remove the right forward wheel (see. "Replacement of a wheel").

3. Remove the right forward flap (see. "Removal and installation of mudguards of wheels and flaps").

4. A key "on 13" weaken an inhaling of a bolt of back lower fastening...	5.... and nuts of forward lower fastening of the pump.

6. A six-sided key "on 8" weaken an inhaling of a bolt of the top fastening of the pump...	7.... and rotation of an adjusting bolt (a key "on 10") weaken a belt tension.

8. Take off a belt of the drive of the pump of the hydraulic booster of steering.

9. Establish a new belt and adjust its tension (see. "Check and adjustment of a tension of a belt of the drive of the pump of the hydraulic booster of steering").