11.9.17. Removal and installation of a back door

It will be required to you: two keys "on 10", a face head "on 15".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an upholstery of a back door and a moisture protective film (see. "Removal and installation of an upholstery of a back door").
3. Holding a pin from a provorachivaniye, the second key turn off a nut and take a pin of the limiter of opening of a door.
4. Separate a block of the electric drive of blocking of the lock of a back door.
5. Separate a block of a plait of wires of a window regulator.
6. Disconnect holders of a plait of wires from the internal panel of a back door.
7. Shift a protective cover...
8.... also take a plait of wires from a technological opening of a back door.
9. Holding a door (it is the best of all if it is done by the assistant), turn out two bolts of fastening of a door to the top and lower loops and remove a door.
10. Establish a back door as it should be, the return to removal.