You will need the screw-driver with a crosswise edge.

Note This operation is shown on the example of the left external mirror, the right external mirror is removed and established similarly.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove an upholstery of a forward door and a moisture protective film (see. "Removal and installation of an upholstery of a forward door").	3. Squeeze a clamp...

4.... also separate a block of a plait of wires of the left external mirror.	5. Turn out two screws of fastening...

6.... also remove a decorative slip, bringing a clamp of the top fastening of a slip out of an opening.	7. Turn out three screws of fastening of the left external mirror...

8.... also remove it, bringing a plait of wires of a mirror out of an opening at doors.	9. Turn out three screws of fastening...

10.... also remove a mirror arm.

11. Establish details as it should be, the return to removal.