You will need a key hexagon "on 6".

1. Remove the internal handle of a back door and a moisture protective film (see. "Replacement of the internal handle of the drive of the lock of a back door").

2. Turn out two bolts of fastening of the lock of a back door.	3. Take away the lock and remove the plastic connecting plug from the lever of blocking of the lock.

4. Remove the lock assembled with draft.

5. Pull for draft, insert into a cut in the lower part of the lock the screw-driver and remove draft.

6. Wring out a clamp...	7.... also separate a block of a plait of wires of the electric drive of blocking of the lock of a back door.

8. Turn out two screws of fastening...	9.... also take the electric drive of blocking of the lock from an assembly aperture of the internal panel of a back door.

10. For removal of a latch of the lock of a back door turn out it from a carving opening at doors and remove from the car.

11. Establish all removed details as it should be, the return to removal.

12. If the zakhlopyvaniye of a back door is followed by blow of the lever of the lock about a latch, adjust the provision of a latch. For this purpose weaken an inhaling of fastening of a latch and, moving a latch in the cross or longitudinal direction, achieve an unaccented zakhlopyvaniye of a door. After that delay fastening of a latch.