It will be required to you: a face head "on 10", the screw-driver with a flat edge.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove an upholstery of a back door and a moisture protective film (see. "Removal and installation of an upholstery of a back door").	3. Accurately hook the screw-driver edge of a sealant...

4.... also remove internal...	5.... and external sealant of glass of a back door.

6. Connect blocks of a plait of wires to the control unit of a window regulator and a wire to the minus plug of the rechargeable battery. Bring the slider of a window regulator so that its bolts of fastening coincided with technological openings.	7. Turn out two bolts of fastening of glass to the toddler of a window regulator and accurately lower glass down.

8. Turn out a bolt of fastening of a guide of lowering glass...	9.... also take a guide from a doorway.

10. Remove motionless glass...	11.... and it is accurate, trying not to damage a paint and varnish covering, extract lowering glass from a door up.

12. Establish glass of a back door as it should be, the return to removal.