It will be required to you: a stripper of lock rings (or kruglogubets), the screw-driver with a flat edge, the hammer, a mandrel.

1. For replacement of an epiploon of a half shaft merge oil from the transmission (see. "Check of level and replacement of oil in the transmission").

2. Remove the wheel drive from the replaced epiploon (see. "Removal and installation of drives of forward wheels").	3. Hook a cap in a half shaft the screw-driver...

4.... also take it from a half shaft nest.	5. Part the ends of a lock ring...

6.... also remove a ring from a shaft of a semi-axial gear wheel...	7.... and remote washer.

8. Press a half shaft from a shaft of a semi-axial gear wheel.

Prevention The half shaft is established on vents of a shaft of a semi-axial gear wheel with a considerable tightness. At impossibility of its spressovka make-shifts use a universal stripper, otherwise it is possible to damage differential bearings.

9. Take an epiploon the screw-driver.	10. Grease a working edge of an epiploon with transmission lubricant and press it a mandrel of suitable diameter a working edge in a box.

11. The epiploon of a main shaft is replaced on the removed transmission. Take an epiploon the screw-driver.

12. Grease a working edge of an epiploon with transmission lubricant and press it a mandrel of suitable diameter a working edge in a box.

13. Establish details as it should be, the return to removal.

Note For replacement of an epiploon of a rod of the mechanism of gear shifting it is necessary to remove and sort a gear shifting box (see. "Repair of the mechanism of gear shifting").