If the oil leak from under a cover of a head of the block of cylinders did not manage to be eliminated with tightening of nuts of fastening of a cover, replace its laying.

It will be required to you: the screw-driver, passatizh, a key "on 10", the screw-driver with a crosswise edge.

1. Disconnect high-voltage wires from spark plugs, bring wires out of plastic holders on a cover of a head of the block of cylinders.

2. Turn off three nuts of fastening of the holder of high-voltage wires...	3.... also remove the holder.

4. Weaken an inhaling of a collar of fastening of the taking-away hose of ventilation of crankcase gases...	5.... also remove a hose from a branch pipe on a cover of a head of the block of cylinders.

6. Weaken a collar of fastening of the bringing hose of ventilation of crankcase gases...	7.... also remove a hose from a branch pipe on a cover of a head of the block of cylinders.

8. Turn out six bolts and three hairpins of fastening of a cover of a head of the block of cylinders to a head of the block of cylinders...	9.... also uncover a head.

10. Remove laying from a cover of a head of the block of cylinders.	11. Establish new laying of a cover of a head of the block of cylinders and all earlier removed details upside-down. Tighten bolts and hairpins of fastening of a cover of a head of the block of cylinders in the sequence shown on a photo.