It will be required to you: a face head "on 22", a key hexagon "on 7", keys "on 18", "on 19", an alligator wrench.

1. Slow down the car the parking brake and establish an antiretractable emphasis ("boots") under back wheels.

2. Remove a wheel.	3. Disconnect from arms on a damping rack holders of a brake hose...

4.... and plait of wires of the sensor of frequency of rotation of a wheel.	5. Take off a protective cap of a pillow of fastening of a damping rack to a body.

6. Turn off a nut of fastening of a rack, holding its rod from a provorachivaniye the key hexagon passed in an opening of a face head which, in turn, rotate an alligator wrench.	7. Remove a pillow of fastening of a rack.

8. Turn off nuts of two bolts of fastening of a damping rack to a rotary fist, take bolts from openings of a rack and a fist...

Note Before dismantling of connection of a damping rack and a rotary fist mark in any way (for example, paint) the mutual provision of a rack and a fist that at assembly to establish them in former situation, without having broken a corner of a cross inclination of an axis of turn of a wheel.

9.... also remove a damping rack.

10. Establish details as it should be, the return to removal.

Note After replacement of a damping rack of a forward suspension bracket or its details check and if necessary adjust the angles of installation of wheels (see. "Check and adjustment of angles of installation of wheels"). Use services of the workshops having the special equipment.