Rubber pillows of a suspension bracket of system of production of the fulfilled gases replace in case because of their damage or excessive deformation elements of system begin to knock, adjoining to a body or other units of the car.

You will need the screw-driver.

1. Install the car on a viewing ditch or the elevator.

2. For replacement of a pillow of a back suspension bracket of the main muffler by means of the screw-driver remove a pillow from a body arm...	3.... and from an arm of the main muffler.

4. Replace with a similar way a pillow of a suspension bracket of the main and additional mufflers.	5. For replacement of pillows of an average suspension bracket of the main muffler raise the muffler and remove pillows from body arms...

6.... and from muffler arms.	7. For replacement of pillows of a suspension bracket of a reception pipe by means of the screw-driver remove pillows from an arm of a reception pipe, and then from stretcher arms.

Good advice In case of need the damaged pillows can just be cut off.

8. Establish new pillows as it should be, the return to removal.

Good advice For simplification of installation of pillows moisten arms with soap solution.