It will be required to you: a key "on 10", the screw-driver with a crosswise edge, a drill, a drill with a diameter of 5 mm, a zaklepochnik.

For removal of the lock of a cowl execute the following.

1. Remove facing of a radiator (see. "Removal and installation of facing of a radiator").	2. Drill four rivets of fastening of the lock of a cowl and take the lock from under the forward panel.

3. Disconnect a tip of a cable of the drive of the lock and remove the cowl lock.

4. Put the lock as it should be, the return to removal. Before installation of the lock of a cowl grease its details with jellied lubricant, for example Litol.

5. If after installation the lock is indistinctly locked or hardly opens, adjust the provision of a latch (see below in this subsection).

For removal of the drive of the lock of a cowl execute the following.

1. Disconnect a drive cable from the cowl lock (see above in this subsection).

2. Turn out two screws of fastening of the handle of the drive to a body sidewall...	3.... also bring the handle together with a cable out of the dashboard.

4. Disconnect a cowl lock drive cable tip from the lever of the handle and remove it.

5. Take a cable, extending it in podkapotny space.

6. Establish details as it should be, the return to removal.

For removal of a latch of the lock of a cowl execute the following.

1. Turn out two bolts of fastening...	2.... also remove a cowl lock latch.

3. Establish a cowl lock latch as it should be, the return to removal.

4. If after installation the lock is indistinctly locked or hardly opens, adjust the provision of a latch.

5. Weaken an inhaling of bolts of fastening and, moving a latch in the cross or longitudinal direction, achieve an unaccented zakhlopyvaniye of a cowl. After that tighten screws of fastening of a latch.