11.8.1. Removal and installation of a cowl

It will be required to you: keys "on 10", "on 12", the screw-driver with a flat edge.

Good advice
To avoid injuries and not to damage a car detail, remove a cowl with the assistant.

1. Open a cowl and establish it on an emphasis.
2. Remove the holder of a tube of a washer of glass of a wind window from the left edge of a cowl.
3. Disconnect a tube from jets of washers of a windshield and take it aside.
4. Turn out a bolt of fastening of a wire of "weight".

Good advice
If you remove a cowl not for replacement, mark its situation concerning loops, for example, having outlined loops on a contour a felt-tip pen.

5. Holding a cowl (it is the best of all if it is done by the assistant), turn out on two bolts of fastening of a cowl to both loops and remove a cowl.
6. Establish a cowl and all removed details as it should be, the return to removal.