It will be required to you: a key "on 10", the screw-driver with a crosswise edge.

Note Removal and installation of a support of the shelf on the left side of salon are shown. The shelf support is removed on the right side similarly.

1. For removal of a support of the shelf remove the shelf of a luggage carrier.

2. Disconnect a block of a plait of wires from the back loudspeaker.

3. Cast away the left part of a pillow of a back seat forward.

4. Turn out a bolt of the lower fastening of a belt.	5. Remove a decorative cap from the top bolt of fastening of a belt...

6.... also turn out a bolt.	7. Pass a seat belt together with a belt buckle in an opening of a support of the shelf.

8. Turn off four nuts of fastening...	9.... take away a shelf support...

10.... disconnect a block from a plafond of illumination of a luggage carrier and remove a shelf support.	11. For removal of back facing of a luggage carrier turn out four screws of fastening...

Note Screws of fastening of back facing of a luggage carrier are so located.

12.... also remove facing.	13. For removal of side facing of a luggage carrier remove a clamp...

14.... also take facing of a luggage carrier.

15. Establish all removed details as it should be, the return to removal.