It will be required to you: screw-drivers with flat and crosswise edges.

Note Removal and installation of facings on the left side of salon are shown. Facings are removed on the right side similarly.

1. For removal of facing of a forward rack execute the following operations.

2. Having hooked the screw-driver, remove a cap...	3.... turn out the screw of the top fastening...

4.... also remove facing of a forward rack, bringing her the lower holder out of gearing.	5. For removal of facing of a forward threshold pull it up and, overcoming the elastic resistance of plastic holders, remove facing.

6. Examine facing fastening, the broken holders replace.	7. Similarly remove facing of a back threshold.

8. Before removal of facings of the central rack turn out the top bolt of fastening of a seat belt.

9. Hook the screw-driver...	10.... also remove the lower and top decorative caps.

11. Turn out on one screw from lower...	12.... and top party of fastening of the top part of facing of the central rack...

13.... also remove facing.	14. Turn out two lower...

15.... and two top screws of fastening of the lower part of facing of the central rack...	16.... remove a seat belt and remove facing.

17. Before removal of facings of a back rack turn out the top bolt of fastening and remove the top fastening of a seat belt.

18. Hook the screw-driver and take caps...	19.... turn out two screws of fastening...

20.... also remove facing of a back rack.

21. Establish facings of salon and all removed details upside-down.