It will be required to you: screw-drivers with flat and crosswise edges.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove an overlay of the central console (see. "Removal, dismantling and installation of the dashboard").	3. Squeeze clamps...

4.... also disconnect a block of a plait of wires.	5. Similarly disconnect other blocks of plaits of wires from conclusions of the control unit of a heater.

6. Having hooked for edge...	7.... remove the spring holder.

8. Disconnect a drive cable tip from a control lever heater gates.	9. Similarly disconnect other cables of the drive of gates of a heater from control unit levers...

10.... also remove the control unit of system of heating and conditioning.

11. Install the control unit of system of heating and conditioning and all removed details as it should be, the return to removal.