It will be required to you: a key "on 10", the screw-driver with a crosswise edge.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Weaken an inhaling of a coupling bolt of a tip...	3.... also disconnect a wire from the plus plug of the rechargeable battery.

4. Wring out clamps...	5.... also raise a cover of plugs of power wires.

6. Turn out screws of fastening of plugs of power wires to the block of power safety locks and remove the block.

7. Install the block of power safety locks as it should be, the return to removal.