It will be required to you: the screw-driver with a crosswise edge, passatizh with narrow sponges.

1. For receiving access to safety locks and the relay of the assembly block located in salon turn out four screws of fastening of the ware shelf...	2.... also remove the shelf.

3. Before replacing the fused safety lock, find out the reason of its burn-out and eliminate it. When troubleshooting see the chains specified in tab. 10.1 which are protected by this safety lock.

Prevention Do not replace safety locks with the crossing points or safety locks calculated on other current and self-made crossing points – it can lead to damage of electric devices and even to the fire.

4. Hook tweezers on a safety lock and take it from the contact socket.	5. So the fused safety lock looks (the crossing point shown by an arrow in the holder fused and was opened). For replacement of a safety lock use a spare safety lock of the same face value.

6. Install a safety lock of the same face value in the contact socket, as removed.

7. For receiving access to safety locks and the relay of headlights and the conditioner squeeze clamps...	8.... also uncover the assembly block.

9. Hook tweezers on a safety lock and take it from the contact socket.

10. Install a safety lock of the same face value in the contact socket, as removed.

11. In need of replacement take the relay from the assembly block, shaking it here and there, and install the new relay.	12. For receiving access to safety locks and the relay of electric fans of the cooling system squeeze clamps...

13.... also uncover the assembly block.	14. Take the replaced safety lock, using for this purpose, for example, passatizh with narrow sponges.

15. Install a safety lock of the same face value in the contact socket, as removed.

16. In need of replacement take the relay from the assembly block, shaking it here and there, and install the new relay.	17. For receiving access to power safety locks squeeze clamps...

18.... also uncover the block of safety locks.	19. Take a safety lock from the block, using for this purpose passatizh with narrow sponges.

20. Install a safety lock of the same face value in the block socket, as removed.