5.15.3. Removal and installation of an adsorber

The adsorber of system of catching of vapors of fuel is removed for check or replacement at emergence of persistent smell of the gasoline caused by its leakage. Besides, violation of tightness of an adsorber can become the reason of unstable operation of the engine idling up to its stop.
The adsorber is established in a niche of the right forward wheel.
It will be required to you: a key "on 10", the screw-driver with a crosswise edge, bokoreza.
1. Remove the air filter (see. "Removal and installation of the air filter").
2. Remove the flap of the right forward wheel (see. "Removal and installation of mudguards of wheels and flaps").
3. Have a bite collars of fastening of hoses to adsorber unions...
4.... also disconnect taking away...
5.... and bringing hoses from adsorber unions.
6. Turn out two bolts of fastening of an arm of an adsorber to an engine mudguard.
7. Turn out the coupling screw of an arm of an adsorber.
8. Unclench an adsorber arm so that triangular ledges of an adsorber left rectangular openings of an arm...
9.... also remove an adsorber from the car.
10. Establish an adsorber as it should be, the return to removal.

At connection of hoses to unions of an adsorber be guided on the arrows put at the basis of unions and specifying the direction of the movement of vapors of fuel. Besides, diameter of the taking-away union is more than diameter of bringing.