It will be required to you: a key "on 10", a key hexagon "on 5", the screw-driver with a flat edge.

Note This operation is shown on the example of a driver's seat, the front passenger seat is removed similarly.

1. Wring out a clamp...	2.... also separate a block of a plait of wires of a heater of a seat.

3. Take out clamps from plastic percussion caps...	4.... take percussion caps...

5.... also remove a decorative slip from the right guide a sled.	6. Having hooked the screw-driver...

7.... take a clamp...	8.... also remove a cap from the left guide a sled.

9. Holding a bolt from a provorachivaniye...	10.... turn off a nut and take a bolt of the limiter of the course of a driver's seat.

11. Lift the handle of longitudinal adjustment of a front seat up and move a seat against the stop back, having brought a sled out of guides.	12. Raise a seat and, having slightly developed, take out it from interior of the car.

13. Establish a seat as it should be, the return to removal.