You will need a face head "on 13".

Good advice Back door quite bulky therefore remove and establish it with the assistant.

1. Remove a back door upholstery (see. "Removal and installation of an upholstery of a door of a back").

2. Remove a luggage carrier upholstery (see. "Removal and installation of facings and upholsteries of a luggage carrier").

3. Squeeze a clamp and separate a block of a plait of wires of a door of a back.	4. Disconnect the holder of a plait of wires and take a plait of wires from an opening in a body.

5. Disconnect a plait of wires from the holder on a back door loop.

6. Similarly take a plait of wires on the right side.

7. Turn out two bolts from each party of fastening of a door of a back and remove it.	8. In need of removal of loops of fastening of a door of a back turn out two bolts and remove the left loop, the right loop of fastening of a door of a back is removed similarly.

Good advice If you remove a back door not for replacement, we recommend to mark the provision of loops (for example, lead round them on a contour a felt-tip pen).

9. Establish a back door as it should be, the return to removal.