Remove the lever of the drive of the parking brake for replacement at wear or damage of the gear sector or a doggie.

It will be required to you: a face head "on 13", two keys "on 10", passatizh, the screw-driver with a flat edge.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Remove a back part of facing of a tunnel of a floor (see. "Removal and installation of facing of a tunnel of a floor").	3. Weaken an inhaling of lock-nuts...

4.... and, holding cables from a provorachivaniye, turn off adjusting nuts.	5. Disconnect a block of a plait of wires from a conclusion of the switch of an alarm lamp of turning on of the parking brake.

6. Turn off two nuts of fastening...	7.... also remove the lever of the drive of the parking brake.

8. Before installation of the lever of the drive on the car grease with jellied lubricant its gear sector.

9. Install the lever as it should be, the return to removal, and adjust the parking brake system (see. "Adjustment of the drive of the parking brake").