Pumping (removal of air) of hydraulic system of the amplifier of steering is necessary after any works connected with depressurization of system (replacement of the pump or pipelines). A sign of availability of air in system is wedging of a steering wheel in attempt to sharply turn it. Besides, the pump publishes the increased noise at the time of turn of a steering wheel, and liquid in a tank usually foams.

1. Fill in working liquid in system of the hydraulic booster (see. "Check of level and dolivka of working liquid in a tank of the hydraulic booster of steering") to a tag "MOVE" on the index established on a tank stopper (or to the top tag on a tank wall).

2. Launch the engine and turn a steering wheel against the stop in one party.

Prevention Do not hold a steering wheel in extreme situation more than 10 pages.

3. Turn a steering wheel against the stop to the opposite side.

4. Turn a steering wheel in average situation and kill the engine.

5. Check the level of working liquid in a tank of the hydraulic booster and if necessary add.

Note Level of working liquid at the heated-up engine has to be in a tank not above a tag "MOVE" on the index established on a tank stopper (or not above the top tag on a tank wall), at cold — tags of "MIN" on the index are not lower (not below the lower tag on a wall).

6. Repeat operations 2-5 until the level of working liquid in a tank does not cease to decrease.