It will be required to you: the screw-driver with a crosswise edge, passatizh.

1. Remove a stopper of a tank of the hydraulic booster of steering and pump out working liquid from a tank (for example, the big syringe). Establish a stopper into place that dirt did not get to a tank.

2. Squeeze the unbent collar ears...	3.... shift a collar on a hose and disconnect the soaking-up pump hose from a tank.

4. Similarly disconnect a drain hose of the steering mechanism from a tank.	5. Weaken an inhaling of a collar of fastening of a tank...

6.... remove a collar...	7.... and rubber ring.

Note Replace strongly pressed out, torn or hardened ring.

8. Remove a tank of the hydraulic booster of steering from an arm.

9. Install a tank of the hydraulic booster of the steering mechanism as it should be, the return to removal.

10. Fill in working liquid in a tank and remove air from system of the hydraulic booster of steering (see. "Pumping of system of the hydraulic booster of steering").