It will be required to you: liquid for the hydraulic booster of steering, a pure rag.

Note In a tank of the hydraulic booster add the ATF DEXRON liquid recommended by manufacturer.

The tank is installed on an arm in a forward part of a motor compartment at the left. Tags of "MAX" and "MIN" are applied on the case of a tank.

Tags are also applied on the probe attached to a tank cover. At the engine which is warmed up up to the normal temperature the level of working liquid has to be at a tag of "MAX". At the cold engine the level of working liquid should not be lower than a tag of "MIN".

Note Check the level of working liquid of the hydraulic booster of steering at the idle engine.

1. Turn off a tank stopper...	2.... also check the level of working liquid on the measuring probe.

3. Add necessary amount of working liquid if its level in a tank is lower than norm.	4. Wrap a stopper and wipe begin to flow.