You will need a face head "on 24".

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Establish a steering wheel in the situation corresponding to the rectilinear movement of the car.

3. Remove the module of a safety cushion of the driver (see. "Removal and installation of a safety cushion of the driver").	4. For convenience of the return installation mark the provision of a steering wheel concerning a shaft.

5. Weaken an inhaling of a nut of fastening of a steering wheel to a steering shaft, holding a steering wheel from a provorachivaniye.

Prevention Completely do not screw together a nut of fastening of a wheel from a shaft, otherwise at removal of a wheel it is possible to put with hands to itself a trauma in case of its sharp detachment from a shaft.

Good advice It is possible to record a steering wheel from a provorachivaniye by means of the locking mechanism of the anti-theft device of the lock of ignition. For this purpose take out a key from the lock of ignition and turn a steering wheel until fixing of a shaft the anti-theft device. After weakening of an inhaling of a nut of fastening of a steering wheel switch-off the anti-theft device, having inserted a key into the ignition lock, and again establish a steering wheel in the situation corresponding to the rectilinear movement.

6. Sharp blows of hands bring down a steering wheel from shliyets of a shaft...	7.... finally turn off a nut of fastening of a steering wheel...

8.... also remove a steering wheel, having passed a plait of wires in an opening of its nave.

9. Establish a steering wheel and the removed details as it should be, the return to removal.