8.3.2. Removal and installation of a casing of a steering column
You will need the screw-driver with a crosswise edge.
1. Remove a steering wheel (see. "Removal and installation of a steering wheel").
|
Note
Need of removal of a steering wheel is explained by the fact that access to two screws of fastening of a casing the helmsman of a column is closed by facing of a wheel.
|
|
2. From below a steering column turn out three screws which are pulling together among themselves parts of a casing.
|
3. Turn out two screws of fastening of the lower part of a casing to a connector of understeering switches...
|
6. Establish details as it should be, the return to removal.