The back nave and its bearing represent the hardly sorted knot. In addition the bearing separately in spare parts is not delivered. Therefore at failure of the bearing replace knot assembled.

It will be required to you: a dodecahedral face head "on 30", a chisel, the hammer.

1. Weaken an inhaling of bolts of fastening of a wheel.

2. Include the I transfer and establish an emphasis under forward wheels. Raise and establish a back part of the car on reliable support.

3. Remove the corresponding wheel.

4. Remove the brake drum (see. "Removal and installation of reels of brake mechanisms of back wheels").	5. Vypressuyte...

6.... also take off a protective cap of a nave.	7. Weaken a nave nut inhaling...

8.... also turn off it from a pin.	9. Remove from a pin a nave assembled with the bearing.

10. Establish a new nave and all removed details as it should be, the return to removal.