Methods of launch of the engine with system of injection of fuel are identical at any temperature of external air.

1. Pull on yourself the handle of the drive of the lock and open a cowl.	2. Measure by the Masloizmeritelny probe oil level...

3.... it has to be between tags of "MAX" and "MIN".	4. Attentively examine the engine and podkapotny space. Pay attention on begin to flow gasoline, oil, the brake and cooling liquids. Be convinced of integrity of an electrical wiring. Check landing of high-voltage wires in nests of the module of ignition and on candles.

5. Without closing a cowl (in case of a rain or snowfall cover it), you take the wheel. Include ignition, having turned a key in the ignition switch in situation "I". At the same time the electrogasoline pump will join.

If the engine was not started, there are three main reasons:

– the system of start-up does not work;

– the system of ignition does not work;

– the power supply system does not work.

Good advice If for any reason during unsuccessful attempt of start-up spark plugs "are filled in", use the mode of a purge of cylinders. For this purpose press an accelerator pedal against the stop and include a starter. In this mode supply of fuel is absent and from cylinders a stream of fresh air excess gasoline is removed — spark plugs dry. After a purge repeat start-up attempt regularly.