You will need the screw-driver with a flat edge.

1. Remove the dashboard from places of fastening so that to get access to the block of external lighting and lighting of devices from the inside of the dashboard (see. "Removal, dismantling and installation of the dashboard").	2. Squeeze clamps of a block of a plait of wires of the dashboard...

3.... also disconnect a block from the socket of the control unit of external lighting.	4. Press a clamp...

5.... also disconnect a block of a plait of wires from the regulator of lighting of devices.	6. Accurately squeeze two clamps...

7.... also take the block from a dashboard arm.

8. Install the control unit of external lighting and lighting of devices as it should be, the return to removal.

9. Install the dashboard.