10.10.7. Replacement of a back lamp
It will be required to you: a key "on 8", the screw-driver with a flat edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
4.... also separate blocks of a plait of wires of the lamp established in a back wing.
|
5. Turn off three nuts of fastening of a lamp...
|
6.... also remove a lamp.
7. Establish a lamp as it should be, the return to removal.
10. Turn off four nuts of fastening of a lamp to the internal panel of a door of a back.
11. Separate a block of a plait of wires of a lamp of a door of a back.
12. Remove an overlay of a door of a back (see. "Replacement of the lock and switch of the lock of a door of a back") also remove a lamp.
13. Establish a lamp as it should be, the return to removal.