It will be required to you: keys "on 18", "on 30", passatizh, bokoreza.

1. Remove the steering mechanism from the car (see. "Replacement of the steering mechanism").

Notes Need of removal of the steering mechanism for replacement the helmsman of draft is explained by the fact that access to knot of fastening of draft on the steering mechanism installed on the car is impossible.

Work is shown on the steering mechanism disconnected from a cross-piece of a forward suspension bracket. With sufficient skills the steering mechanism can be not removed from a cross-piece.

2. Squeeze the unbent ears of a small collar of fastening of a cover, shift a collar on steering draft and remove it.	3. Have a bite the second collar of fastening of a protective cover...

4.... also shift a protective cover on draft.

Note Collar of fastening of a protective cover of one-time use. At assembly surely replace it new.

5. Similarly disconnect the second cover from the steering mechanism.

6. Unscrew the case of the hinge of steering draft, holding a lath from a provorachivaniye the second key, and remove draft. In need of replacement remove a protective cover from draft.

7. Similarly remove the second steering draft.

8. Establish details as it should be, the return to removal. Tighten bolts and nuts the moments specified in the appendix 1.

9. Remove air from system of the hydraulic booster of steering (see. "Pumping of system of the hydraulic booster of steering").

10. Check and if necessary adjust the angles of installation of forward wheels at the service station having the special equipment.