10.5.3. Removal and installation of the generator
It will be required to you: keys "on 8", "on 10", "on 13".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Take off a belt of the drive of the generator and compressor of the conditioner from a generator pulley (see. "Replacement of a belt of the drive of the generator and compressor of the conditioner").
3. Remove a cap from a nut of a conclusion of "B+" of the generator.
|
4. A key "on 13" turn off a nut of fastening of a tip of a wire to a conclusion of "B+" of the generator...
|
5.... also remove a wire tip.
|
6. A key "on 8" turn off a nut of fastening of a tip of a wire to a conclusion of "D+" of the generator...
|
7.... also remove a wire tip.
|
8. A key "on 10" turn out two bolts of fastening of the generator to an engine arm...
|
9.... also remove the generator from the car.
10. Install the generator as it should be, the return to removal.
11. Establish into place a belt of the drive of the generator and compressor of the conditioner.