Chery:: Amulet:: Removal and installation of a washer reservoir of a windshield

10.12.1. Removal and installation of a washer reservoir of a windshield

You will need a face key "on 10".

1. Disconnect a wire from the minus plug of the rechargeable battery.


2. Take a tank of the hydraulic booster of steering aside (see. "Replacement of a tank of the hydraulic booster of the steering mechanism") to get access to a nut of fastening of a washer reservoir.	3. Turn out a nut of fastening of a washer reservoir.


4. Remove a tank from an arm.	5. Disconnect a block of a plait of wires from the washer pump.


6. Merge the washing liquid if it in it is from a tank.	7. Accurately take out the washer pump from the sealing plug of a tank.


8. Hook the screw-driver...	9.... also take out the sealing plug from a tank opening.

Note

Replace strongly hardened or torn plug new.

10. Establish details as it should be, the return to removal.

Note

At installation at first insert the plug into a tank opening, and then install the pump.