In the presence on a working surface of disks of zadir, deep рисок and other defects increasing wear of blocks and reducing efficiency of braking and also in case of the raised side beating of the disk causing vibrations when braking, replace disks. In specialized workshops the disk can be pierced and proshlifovat on both sides on identical depth, but after processing thickness of a disk has to be not less minimum admissible value – 19 mm. If thickness of one of disks is less than specified value, replace both disks. When replacing brake disks surely replace brake shoes with a new set.

It will be required to you: a key "on 17", a key for bolts of wheels, the screw-driver with a crosswise edge.

1. Remove a wheel.

2. Turn out two bolts of fastening...	3.... and, without disconnecting a brake hose, remove a support of the forward brake mechanism, having fixed it by a wire on a spring of a forward suspension bracket. At the same time do not allow twisting or a tension of a hose.

4. Turn out the lock screw...	5.... also remove a brake disk.

6. Similarly remove the right brake disk.

7. Establish details as it should be, the return to removal.

Note Before installation of a disk carefully clear privalochny surfaces of a nave and a disk of a rust and scale as even the smallest particle clamped between privalochny surfaces will cause a beating of a disk and vibration when braking.