It will be required to you: keys "on 13", "on 17", a special key "on 14" for pipelines, capacity for discharge of brake fluid.

1. Remove the left forward wheel.

2. Weaken an inhaling of fastening of a brake hose...	3.... turn out bolts of fastening of a support...

4.... take a support aside, finally turn out a brake hose...	5.... also remove a support.

6. Turn out two bolts of fastening and remove a guide of blocks.

7. Replace a support of the right wheel similarly.

8. Establish details as it should be, the return to removal. Before installation of bolts of fastening of a guide of blocks to a rotary fist apply an anaerobic clamp of a carving on a carving. After installation restore the level of brake fluid in a tank of the main brake cylinder and remove air from a hydraulic actuator of brakes (see. "Pumping of a hydraulic actuator of the brake system").