9.5.1. Replacement of a tank of the main brake cylinder

It will be required to you: a face head "on 13", a special key "on 11" for brake tubes, the screw-driver with a flat edge.
1. Turn off a stopper of a tank of the main brake cylinder...
2.... also pump out from it brake fluid, for example, the medical syringe or a rubber pear.
3. Overcoming the elastic resistance of connecting plugs, remove a tank.

It is more convenient to make replacement of a tank on the removed main brake cylinder (see. "Replacement of the main brake cylinder").

4. Take connecting plugs from cylinder case openings (if necessary hook them the screw-driver). Examine plugs and if rubber aging signs appeared, replace them.
5. Install a tank of the main brake cylinder as it should be, the return to removal.

Good advice
For simplification of installation of a tank moisten connecting plugs with fresh brake fluid.

6. Fill in brake fluid and remove air from a hydraulic actuator (see. "Pumping of a hydraulic actuator of the brake system").