The switch of light of a backing is installed in the top part of a case of the transmission.

You will need a key "on 22".

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Squeeze a clamp of a block of a plait of wires...	3.... also disconnect a block from the sensor socket.

4. Weaken a backing light switch inhaling...	5.... and, having turned out the switch, remove it from the car.

6. Remove a copper sealing ring. Replace strongly pressed out ring new.	7. Execute check of serviceability of the switch. Connect probes of the tester included in the pro-calls mode of chains to its conclusions. Press a switch plunger – the tester has to give a sound signal. If it does not occur, the switch is faulty.

8. Establish details as it should be, the return to removal.