10.20.1. Replacement of the sensor of an alarm lamp of emergency pressure drop of oil
The sensor of an alarm lamp of emergency pressure drop of oil is screwed in the oil highway of the block of cylinders of the engine from its right side (on a photo the inlet pipeline is for descriptive reasons removed).
You will need a key "on 22".
1. Disconnect the wire socket from the sensor.
2. Weaken an inhaling of the sensor and, having turned out the sensor from the block of cylinders, remove it from the car.
3. Execute express check of serviceability of the sensor. Connect probes of the tester included in the mode of measurement of resistance to its conclusion and the case. Remember value of resistance of the sensor.
4. Through an opening in the sensor union a metal core or a thick wire accurately press a sensor membrane. Resistance of the sensor has to increase significantly. If it does not occur, the sensor is faulty.
5. Install the sensor as it should be, the return to removal.