10.14.3. Removal and installation of the electric motor of the fan of system of heating (conditioning) and ventilation of salon
It will be required to you: screw-drivers with a flat and crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the dashboard (see. "Removal, dismantling and installation of the dashboard").
|
3. Lift a clamp of a block of a plait of wires up...
|
4.... also disconnect a block from the electric motor socket.
|
|
5. Bring plaits of wires out of holders.
|
6. Turn out three screws of fastening of the electric motor of the fan to the heater case...
|
7.... also take the electric motor from the case.
|
Notes
So the fan electric motor assembled with a krylchatka looks. At malfunction of the electric motor or a krylchatka all knot assembled as the attempt of removal of a krylchatka from a shaft of the electric motor will lead to her breakage is subject to replacement.
Balancing of a krylchatka is carried out assembled with the electric motor industrially at specialized diagnostic stands by means of installation on the blade of the fan of balanced brackets.
|
8. Install the fan electric motor as it should be, the return to removal.