10.13.2. Removal and installation of electric motors of fans of the cooling system of the engine

It will be required to you: a key "on 8", a face key "on 10", the screw-driver with a flat edge.
1. Remove electric fans with a casing (see. "Removal and installation of electric fans of a radiator of the cooling system of the engine").
2. A face key "on 10" turn off three nuts of fastening of the electric motor to a casing.
3. Weaken an inhaling of the holder of additional resistance and take out resistance from the holder.
4. Separate holders of wires.
5. Take wires from protective corrugations.
6. Take out a block of a plait of wires of the electric motor from the holder.
7. Remove the electric motor assembled with a krylchatka from a casing.
8. A key "on 8" turn off a nut of fastening of a krylchatka to an electric motor shaft...
9.... also remove a krylchatka.
10. Disconnect additional resistance.
11. Establish details as it should be, the return to removal.

The electric motor of the second electric fan is removed similarly.