10.11.3. Removal, dismantling and installation of screenwash

It will be required to you: a key "on 10", a face head "on 13", the screw-driver.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Hook the screw-driver decorative caps of nuts of levers of brushes of a screen wiper...
3.... also remove caps.
4. A face head "on 13" turn off nuts of fastening of levers.
5. Having hooked the screw-driver, shift levers from shliyets...
6.... also remove levers together with brushes.
7. Remove a lattice and facing of a box of airinflow (see. "Removal and installation of a lattice and facing of a box of airinflow").
8. Wring out a clamp and disconnect a block of a plait of wires from the screen wiper motor-reducer socket.
9. A key "on 10" turn out three bolts of fastening of a screen wiper to a body...
10.... also remove a screen wiper.
11. Hook the screw-driver and remove drafts of a screen wiper from spherical hinges of cranks.
12. A key "on 10" turn off a fastening nut...
13.... and, having remembered situation in which the crank is established on a motor-reducer shaft, remove a crank from a shaft.
14. A key "on 10" turn out three bolts of fastening of a motor-reducer...
15.... also remove a motor-reducer from a screen wiper arm.

So the screen wiper motor-reducer removed from a fastening arm looks.

16. Put new jellied lubricant in screen wiper trapeze hinges.
17. Collect and establish a screen wiper as it should be, the return to removal.